Q45F三通球閥產品特點:
一、兩閥座密封三通球閥結構緊湊、外型美觀、密封性能好。
它能實現對管道中介質流向的切換。也能使相互垂直的兩個通道連通或關閉。（如流向圖A）
二、四閥座密封三通球閥造型美觀，結構緊湊合理，它不僅可實現介質流向的切換，也可使三個通道相互連通，同時也可關閉任一通道，使另外兩個通道連通，靈
活控制管路中介質的合流或分流。（如流向圖B）
Features
1. In the double-seat sealing design, the 3-way ball valve enjoys compact structure,goodly configuration ａnd favorable sealing performance. The valve could make a realization the switching of flow direction of the medium inside the pipeline, furthermore, it also could connectshut-down the two orthogonal passages.（As shown in Flow Graph A）
2.In the 4-seat sealing design, the 3-way ball valve enjoys reasonable, compact structure ａnd goodly configuration. The valve could not only make a realization the switching of flow direction of the medium inside the pipeline, but also connect the 3 passages on another. Meanwhile, the valve also features the capacity of shutting-down one of the 3 passages while connecting the other 2 ones for the flexible control of the convergent flowshunting of the medium in pipelines.（As shown in Flow Graph B）
Q45F三通球閥主要零件材質Main Patrs ａnd Materials
零件名稱
Accessory name |
材 質 Material |
| GB |
ASTM |
閥體、閥蓋
Body,bonnet |
WCB |
A216-WCB |
密封圈
Sealing Ring |
PTFE、對位聚苯
PTFE、Counterpoint polypheny1 |
PTFE、對位聚苯
PTFE、Counterpoint polypheny1 |
| 球體 Ball |
1Cr18Ni9Ti |
SS 304 |
閥座、閥桿
Seat、Stem |
2Cr13 |
A246-416 |
雙頭螺柱
Dual-head double-screw bolt |
35CrMoA |
A193-B7 |
備注：三通球閥一般采用兩閥座結構，如流向圖A所示兩種工況。選用兩閥座L型結構（即Q44型）。流向圖B中①和④兩種工況亦可選用兩閥座T型結構（即Q45型）。流向圖B 中②和③兩種工況必須選用四閥座T型結構（即Q45型）。
其余工況也可選用四閥座結構,但應在訂貨合同中注明閥座結構。如閥門有其它要求請參閱樣本《球閥的型號編制方法》填寫相應的要求代號。
